Welcome, Guest. Please login or register.

Author Topic: Amiga flash hard drive  (Read 1940 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ptekTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 328
    • Show all replies
Amiga flash hard drive
« on: August 09, 2007, 06:54:43 PM »
Hi

I have an Amiga1200 with a 540MB 3.5" HD and I would like to swap the HD a 1GB CF flash card.

I've read this Amiga 1200 HD/40 Compact Flash Modification and looked for the adapter at here and the cable here.

However the price seems high compared to this and this

I would prefer to buy from Europe instead of USA due to additional fees.

What do you recommend me?
I'm have a normal Amiga 1200 IDE interface (not buffered) so I guess I'll not feel any substantial speed difference (maybe when writing, but I will not do this very often)

Would the cheaper adapter have any technology that avoid using the same "sectors" of the card?

I guess I could buy an adapter for 40pins (3.5" IDE) and then an 3.5" to 2.5" cable from amigakit.com ?
Onions have layers ...
 

Offline ptekTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 328
    • Show all replies
Re: Amiga flash hard drive
« Reply #1 on: August 10, 2007, 12:29:18 AM »
Quote
I got a 2.5" IDE -> CF adapter from a Hong Kong seller on Ebay, it worked out about £5-6 at most including postage. (The one I have is like this one.)

From the picture I see it have male pins like just any hd. Due to the geometry of it I cannot plug it directly to the amiga 1200 slot since it will be standing vertically so i'll need a cable to connect it to the Amiga (maybe that cable from amigakit.com?)

Thanks
Onions have layers ...
 

Offline ptekTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 328
    • Show all replies
Re: Amiga flash hard drive
« Reply #2 on: August 10, 2007, 12:29:09 PM »
@maffoo,

I was refering to the monting of the CF adapter + CF card into the Amiga 1200 IDE slot... I don't pretend to use my HD anymore (once transfered the contents to the CF, of course). So i'll still need a 2.5" cable to attach it to the Amiga I think.
Onions have layers ...
 

Offline ptekTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 328
    • Show all replies
Re: Amiga flash hard drive
« Reply #3 on: August 10, 2007, 01:41:20 PM »
Quote
If you get a 3.5"->CF adapter you can use the power connector and IDE cable for your existing hard drive (I'm assuming that's 44->40pin already)

Oh I see. Well, I would like a new cable, since my new 3.5"->2.5" is a bit of a mess. Thanks for the replies and the ebay link!
Onions have layers ...
 

Offline ptekTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 328
    • Show all replies
Re: Amiga flash hard drive
« Reply #4 on: September 16, 2007, 05:56:25 PM »
Finally I've got the 2.5" CF adapter for the ebay dude :) Its a long story involving the postal services and border control, but not the seller's fault.

I'm going to buy the 2.5" hard drive cable from www.amigakit.com but it's available in two lenghts that may interest me : 2cm and 5cm.

I think the 2cm would be enough. What do you guys recommend me? Is it too short? It doesn't seems.
Onions have layers ...