Welcome, Guest. Please login or register.

Author Topic: Set the System Time with Genesis  (Read 1803 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline duesiTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show all replies
Set the System Time with Genesis
« on: January 05, 2003, 11:12:41 AM »
I've just encountered this little Problem
When i use an ntp server to get the time while going
online.. Genesis error ntp.metas.ch/daytime
is not found ! In MIAMI this works fine..
Please help because i like to use Genesis only..
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler
 

Offline duesiTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show all replies
Re: Set the System Time with Genesis
« Reply #1 on: January 06, 2003, 05:34:49 PM »
I checked out the Genesis Manual
But there is no description how to enter the time
server...
In MIAMI I use ntp.metas.ch and it works...
Any idea how to enter the server in Genesis ?
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler
 

Offline duesiTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2002
  • Posts: 275
    • Show all replies
Re: Set the System Time with Genesis
« Reply #2 on: January 06, 2003, 05:42:27 PM »
Yes I tried....didn't work also
DNS config is anyway OK I think
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler