Welcome, Guest. Please login or register.

Author Topic: A2500 CD-ROM Addition?  (Read 1872 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Beast96GTTopic starter

  • Full Member
  • ***
  • Join Date: Aug 2008
  • Posts: 191
    • Show all replies
A2500 CD-ROM Addition?
« on: October 02, 2009, 11:51:19 PM »
Wikipedia says AmigaOS supports CDFS CD-ROMs..  I've got OS 3.1 and some ADF images on my PC.  Would I be able to burn a CD on my PC that an Amiga CD drive would read?   If so, what kind and where do I get a drive?  IDE with an adaptor, or a SCSI drive?    

Thanks!

Chris
 

Offline Beast96GTTopic starter

  • Full Member
  • ***
  • Join Date: Aug 2008
  • Posts: 191
    • Show all replies
Re: A2500 CD-ROM Addition?
« Reply #1 on: October 03, 2009, 10:08:49 PM »
Will any scsi CD-ROM work?  Like a 32X drive? I have an A2500/030 so it should have a controller built onto the 030 card, right?  Thanks for the info, guys.
 

Offline Beast96GTTopic starter

  • Full Member
  • ***
  • Join Date: Aug 2008
  • Posts: 191
    • Show all replies
Re: A2500 CD-ROM Addition?
« Reply #2 on: October 04, 2009, 04:38:10 AM »
Quote from: graffias79;524673
If the Amiga 2500 still has an A2091 SCSI controller then you have your SCSI port.  You don't even have to open it up to verify, just look for a DB-25 port sitting vertically in one of the back slots.  It is much more likely to be a SCSI port than a parallel port card installed.

Actually, you're right.  I looked it up and I have this Nexus card installed:  http://amiga.resource.cx/exp/nexus.  

Sounds like all I need is the drive...  Any software required, or will Amiga OS 3.1 see it and read it natively?

AmigaPixel, is there a "terminator" or something that I need to buy also?  or is that just the pin jumpers that plug in?
 

Offline Beast96GTTopic starter

  • Full Member
  • ***
  • Join Date: Aug 2008
  • Posts: 191
    • Show all replies
Re: A2500 CD-ROM Addition?
« Reply #3 on: October 04, 2009, 09:06:55 AM »
Quote from: marcfrick2112;524681
Beast96GT: OS 3.1 has very limited CD-ROM support. I'd suggest a 'proper' CD Filesystem like AsimCDFS (commercial, might be able to find on EBay) or otherwise some freeware/shareware options from Aminet.

As for termination, there might be a jumper on the back of the CD drive to terminate the chain... Depending on the Amiga system, controller, drive, time of day, broccoli, etc..... that jumper may or may not work to properly terminate the SCSI chain. Some ppl. I know say only a separate terminator will work properly.  Myself, I've had no problems using the termination jumper on a few CD-ROM's, or the term. switch on a Zip drive.... but, as always, Your mileage may vary. ;)


Thanks for the response.  When you say 3.1 is 'limited,' what exactly do you mean? I really only need an easy way to transfer files from my PC to my OS 3.1 Amiga, so if it will simply read the disc and copy files to the HD that would be enough.