Welcome, Guest. Please login or register.

Author Topic: Is there new Amiga hardware (running OS 4.x) which supports MIDI?  (Read 12583 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline garygTopic starter

I wonder if my Amiga OS 3.x setup can be ported to a new Amiga computer.

Can a new Amiga running OS 4.2 emulate OS 3.x software?

I raise this question because I see that some new hardware has an RS-232 port.
I assume this would mean it could run MIDI applications IF the software can
run under OS 4.2

Regards to all,
Gary
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #1 on: July 05, 2024, 07:54:28 AM »
OK, thanks, that sounds good.

I asked about the RS-232 port because I play my MIDI files through external
sound modules, not by using software sound samples.

Does anyone know anything about potential timing problems?

Regards,
Gary
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #2 on: July 07, 2024, 02:39:06 PM »
Thanks, Steffen! Yes, Bars&Pipes is what I intend to use.

I assume that the OS4 version created by Alfred Faust smoothly
moves MIDI data to the RS-232 serial port, where it is correctly
sent to external sound modules. Logically, the Triple Play Plus MIDI interface, dependent
for communication on Bars&Pipe's MIDI Out tools, which are also
part of Alfred's software, should work, but I'd have to spend a lot of
money to be sure.

Regards,
Gary
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #3 on: July 07, 2024, 06:42:30 PM »
Steffen, I would think that a MIDI interface and sound module/synthesizer
would be needed to properly verify that such a hardware/software combination
works as expected, but thanks for your thoughts.

Regards,
Gary
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #4 on: July 07, 2024, 08:47:58 PM »
Thanks so much for the links and information. You're one of the reasons
that this Board is so useful, Steffen!

Regards,
Gary
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #5 on: July 07, 2024, 11:12:28 PM »
An Amiga 4000 desktop running OS 3.9 and the Triple Play
Plus with the One Stop Music Shop with 3 additional MIDI Outs.
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #6 on: July 10, 2024, 08:28:38 AM »
Yes, I would expect that a USB MIDI interface would work,
but what I like about my present (classic Amiga) setup is that
I have up to 112 possible channels. However, this is made possible
partly by classic Amiga hardware (the One Stop Music Shop) and
the classic software that comes with Bars&Pipes Pro that "bangs the
hardware" of the Triple Play Plus and the OSMS.

Regards,
Gary
 

Offline garygTopic starter

Re: Is there new Amiga hardware (running OS 4.x) which supports MIDI?
« Reply #7 on: July 10, 2024, 10:38:54 PM »
The OS4 machine I've read about has an RS-232 port.

Regards,
Gary