Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Hard-disk problem  (Read 2802 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline sim085Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2008
  • Posts: 958
    • Show all replies
Hard-disk problem
« on: October 23, 2009, 07:15:12 PM »
Hi,

I have this hard-disk that contains several files in it from back 1992. Around a month ago I connected it to my GVP HD8+ because I needed to copy a file and it worked without any problems. However today I tried doing to same thing and this time the hard-disk is not even starting spinning!! I then connected the other hard-disk and this one also did not want to work either! Note that both hard-disks worked without any problems not more then a month ago! Finally I decided to connect the SCSI -> IDE -> CF card adapter again and this worked without any problem!!

I do not believe that both SCSI hard-disks failed on me (considering that when I packed them a month ago they used to work fine). I thought maybe this is a power problem but do not know how I can test this out. Finally I cannoth understand why the CF adapter is working whule this hard-disks don't - does the foremost need less power?

Regards,
Sim085
Logged
 

Offline sim085Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2008
  • Posts: 958
    • Show all replies
Re: Hard-disk problem
« Reply #1 on: October 23, 2009, 09:50:04 PM »
Quote from: CSixx;527051
Connect them to your PC (even just the power) and see if they spin up.


Both of them started spinning when I connected them to the PC (just the power). So does this mean I have some problems with the GVP? or just its power supply?
Logged
 

Offline sim085Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2008
  • Posts: 958
    • Show all replies
Re: Hard-disk problem
« Reply #2 on: October 23, 2009, 10:02:52 PM »
Quote from: Thomas;527081
Do the same on the Amiga: connect only the power cable. If they don't spin up, you surly have a power problem.


Both hard-disks do not start spinning when I connect just the power cable to them :( However as I said in the previous thread the SCSI -> IDE -> CF card works just fine and boots without any problems. Could it be that the power supply just lost some power? If so then can it be fixed?
Logged
 

Offline sim085Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2008
  • Posts: 958
    • Show all replies
Re: Hard-disk problem
« Reply #3 on: October 24, 2009, 10:35:33 AM »
Quote from: countzero;527137
the SCSI'IDE bridge and CF card hardly consumes any power at all.


If I continue to use the current PSU (at least) for the SCSI'IDE bridge then do I risk damaging these cards?

Quote from: countzero;527137
Yes, seems your PSU has bitten the dust. No it can not be fixed. Just get a small frame PC PSU and adapt it to your amiga using your PSU's connector.


I wounder if I could adapt a laptop PSU and maybe make it fit inside the external plastic of the GVP PSU!!
Logged
 

Offline sim085Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2008
  • Posts: 958
    • Show all replies
Re: Hard-disk problem
« Reply #4 on: October 24, 2009, 03:12:10 PM »
Quote from: countzero;527149
no, there's no risk of damage to your SCSI/IDE setup as far as I'm aware.


That is good to know.

Quote from: countzero;527149
I don't think a laptop PSU would work. They usually only deliver a specific voltage. But you can get a Mini Itx style PSU and fit it into your GVP PSU unit.


Ok I'll see if I can find one at the local store. Thank you very much for all the help :)
Logged
 
Pages: [1]   Go Up
« previous next »