« Reply #2 on: April 06, 2010, 07:25:15 PM »
It's a little more expensive than a typical 32 meg 72 pin SIMM, but it looks fine. SIMMs like that sometimes have physical problems when they have chips on both sides since the chips are so close to the pins. In an angled socket, they can hit the socket on the underside. But these should be fine.
Yea, I have that problem with the SIMM's in it already. I can't swap them over to test them if I needed to . And thats the problem when all you have to go by is photo's !

Logged
A1200T/Blizzard 060@66, PPC@330MHz, 128MB/Voodoo5500/SB128/Scandoubler
A1200/Blizzard IV 030/50, 68882@50, 64MB/4GB CF/WHDLoad
CD32/SX32 Pro 030/40, 68882@40, 64MB/16GB CF
CD32/FMV
A1500/MiniMidget Racer 030/Buddha IDE/40GIG HD/FlickerBlaster 2000/GVP HD+8 6MB Ram
A1500/GVP HD+8 20MB HD/8MB RAM/Internal Genlock
A4000/060, 128MB, 4.1GB HD, CV64, Deneb, Indivision
A500\'s\\A500+/A600\'s\\A1200\'s/CDTV\\CD32\'s/