CD32 and CDTV used on Panasonic LCD..picture is shifted to the left

[AmigaFun]

Hello all

The problem I am having is this. I use both a CDTV and a CD32 on a Panasonic 37"lcd tv. We have two of these sets and both have the same problem. When using RGB the picture is shifted to the left so a black bar is visible on the right and what ever is shown on the left of the screen cant be seen. I have also tried the CD32 on a Samsung 19"LCD and that is fine. Does anyone know of a solution to this or seen it before?
I should say that the TV's are OK as we use a PVR with RGB output that works fine.
Thanks

Martin

[AmigaFun]

Hi da9000, all Amigas are connected using the RGB-Scart cable (CD32 also, as using the floppy adapter with RGB output).
The model of the Panasonic is TX-37LXD70, and the Samsung is an LE19R86D.
As I have said, the TV's work OK on other RGB kit.

[AmigaFun]

@leirbag28

I have posted 2 photos today of the adapter that I am referring to. It was bought from Analogic. I am confident the hardware is ok as we tried another one in the shop so it must be a Panasonic thing.

http://www.amiga.org/gallery/index.php?n=2747=20
http://www.amiga.org/gallery/index.php?n=2748=20

[AmigaFun]

@tribz
Hmmm, I have had a look through the the links you gave and it looks almost the same problem. The picture is not 'rolled over' as it were though, it just has a 1" black bar on the right. I would like to say the Panasonic is faulty, but on two sets? and bearing in mind that other RGB sources are OK.
I have emailed Panasonic sometime back about this but they just gave a generic reply referring to PC's. I will contact them again though as it's too much like the faults described in the Home Theater forum links you gave to run the risk of a warranty problem .

Thanks

[AmigaFun]

@darksun9210

I have used the S/VHS output to the tv and that is OK, but not as good quality as the RGB. The cable I have is from Amigakit and was used on the Samsung TV and was perfect on that.
I have emailed Panasonic, as yet, no reply.