Indivision AGA

[NovaCoder]

kickstart wrote:
Hi guys!

How work the interlaced resolutions under indivision aga?

 They all work very well.

kickstart wrote:
What is the bug connecting indivision aga in a HP or C= Liisa?

There are apparently 3 different Lisa chips all of different heights.  There are only issues with the lowest chip, if you have such a chip you can always sand-down the connector to get the correct fit.

kickstart wrote:
Exist some kind of issues by hot having the a1200 turn on some hours?

 No kind of issues exist for this.

Just make sure you flash to the latest version of the firmware and that you also use the latest version of HighGFX (which allows rock-solid 1024x768 and a 1280x720 widescreen mode :-D ).

[NovaCoder]

Rabbi wrote:
I'd like to get one myself, but I hear that the Indivision AGA is incompatible with the Elbox FastATA-III Controller IDE accelerator, which really cuts down on CD burn time for me.  Is this incompatibility true?

No I think the issue is with FastATA + Mediator + IndivsionAGA

[NovaCoder]

tone007 wrote:
That depends on the TFT/LCD, some scale better than others.  Indivision can't make them do any better than they would connected to a PC.

It also depends on the aspect ratio, an older 4:3 TFT will always look better than (scaled) 16:9 for games (WB is ok because HighGFX now supports a widescreen monitor driver :-D  ).  Another option is to run on a widescreen monitor with black borders to maintain the correct ratio.  

You might also have trouble running games at low 50hz (needed for smoother scrolling) with some TFT's (works fine on my brand new Dell LCD monitor though!).

[NovaCoder]

kickstart wrote:
Anyone knows how many lisas of C= and HP and his profiles?

A user on the EAB has confirmed that the 'sanding mod' does indeed work so you should go and buy an Indivision even if you have a low Lisa  :-)