FS: Amiga500 Amiga1200 PowerSupply New Replacement. $29.95

[tonyp12]

Better than original:
5V @ 5A
12V @ 2A
-12V @ 0.8A

I saved 15 Square Din connectors for 15years.

Update: 2 units left for now, if I can locate more rare connectors, I will get 24 more.
$29.95 +
$6.95 priority-mail in U.S (115v U.S cord included)
$15.95 firstclass mail Worldwide/each (you supply country specific iec cord)

http://PayPal.Me/LimeTechMillLLC

[tonyp12]

Input: 100-to-240 V, 47-to-63 Hz, 1.35A.
UL, CE, TUV

[tonyp12]

Not sure what gauge, but 3 wires will be used for +5V and 3 wires for gnd
+12 and -12 get one wire each, the cable is rated for the outputs.

[tonyp12]

>I'm interested. How much for shipping to Mexico?

Pretty sure Mexico and Canada uses same plug as U.S (all in North America after all)
so I will include the 3 prong cord.

[tonyp12]

I should be able to start shipping some units tomorrow, half of the 15units have been sold now.

[tonyp12]

I notice there is no on/off switch, so you have to unplug cord as off.
There is a green led to show power.

[tonyp12]

2 units left.

if  you need a power switch, putting a inline on the iec cord is an option, you should let ground/earth wire pass through uncut if possible

http://www.ebay.com/itm/WL-AC-110-250V-10A-Inline-ON-OFF-Table-Lamp-Desk-Light-Cord-Cable-Switch-Q-POP/282320975542?

In U.K. I think all outlets have a switch already.

[tonyp12]

OK, last two sold to the above two people.
I guess I need to engineer the 5pin Square connector from scratch, as that is stopping me for doing anymore units.

[tonyp12]

I load test them and measure the voltages on all pins just before I mail them out.
Can you test with another eic cord/outlet?
Could gone bad after I test it, if so mail it back.

[tonyp12]

In two weeks I will start selling Amiga1200 power right angle ADAPTER with same PowerSupply.

As the A500 don't have its power connector on the far end, this adapter will not fit.

This A1200 adapter will have a 4pin molex output and use machined pins to "emulate" the square din connector.

Maybe make a A500 version later.