Welcome, Guest. Please login or register.

Author Topic: GVP HC+8 SCSI+RAM Board - upgrade options  (Read 2260 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline xaccrocheurTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 430
    • Show all replies
GVP HC+8 SCSI+RAM Board - upgrade options
« on: February 24, 2003, 04:13:29 AM »
Hi fellow guru amigans

I have this board in a A4K I recently bought (for basically nothing), it seems to work fine as the RAM is showing up, and I attached a SCSI HD that behaves like expected, albeit slowly.

GVP A2000 HC+8 SERIES II REV. II

I need to know if I can upgrade this baby's RAM, knowing for a long time that GVP (R.I.P.) products used to require *custom* memory units, but I'm not sure about what exactly was "GVP RAM", (is'nt that just 60ns SIMM ?)

Currently, all 8 memory slots are full (for a total of 24Mg, but I'm not sure yet), but this is quite weird : 4 of them are half-sized, like cut in half horizontally,  :-o  :-?

#what is this kind of RAM ? I mean the four little units ?

#Is there any chance to find RAM units for this board ?

#What are the options for upping the RAM of a barebones A4000 ? (not using the GVP) please state any potential speed issue, all the gory details :-D

#Can we still purchase 60ns SIMM Nowadays ? Where ?

#I I want to attach a SCSI CD-ROM to this board, are there any tricks that I should know of ? Is this SCSI chain a proper one ? Is it auto-terminated ?

#How can people miss the fact that this machine, now really affordable (I got this one for 170€, w/ a 1960 screen), is what you would dream for an ideal everyday (email, web and writing) computer ? It's beautiful. It will soon work as good as Amigas work.
I love it.

The latter question quite does not need answer. I mean, the less the better sometimes. I'm suddenly thinking that maybe this situation were we Amigans are, could well be for the better... Well, onto the point, thank you all for reading me and a special kudo to all of you who will remember that nasty GVP stuff ; I really need those infos.

And please forgive my crappy English.

Peace

 :python:

pX
 

Offline xaccrocheurTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 430
    • Show all replies
Re: GVP HC+8 SCSI+RAM Board - upgrade options
« Reply #1 on: February 24, 2003, 05:27:59 AM »
Quote
Yikes! You put this card in a 4000, and it worked??


yep ! Pretty amazingly. According to the guy who sold the thing to me "the RAM onboard is much faster than the one on the MoBo" but you say the opposite, and I would tend to believe you :) but yes, it works, both the RAM and the SCSI bus.

Quote
There's all the jumpers, but being a 16bit card, you're maxed at 8mb RAM on it.


So should I left it in the Miggy at all ? i mean, about the SCSI controller, I suppose that it will be *slow*, and what I need in this machine is a CD-Rom Drive and a big HD... BTW, It seems to have only ONE IDE bus, thus allowing the connection of only 2 ATAPI periph., Am I correct ?

And my main point reamins : How will I upgrade this machine's RAM ? What are my options ? I'm ready to fork out for some addon

thank you again

pX
 

Offline xaccrocheurTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 430
    • Show all replies
Re: GVP HC+8 SCSI+RAM Board - upgrade options
« Reply #2 on: February 24, 2003, 07:10:29 AM »
Quote
It should be SCSI2, which would mean it's capable fo driving 7 SCSI2 devices.


nono, I meant the A4K MoBo, this time I'm not talking about the GVP board, but tjust about the IDE bus of the 4000

Quote
If it's an A4000, your only options are either a thrid party RAM card, probably only available secondhand (if at all) or installing a third party processor upgrade that'll take fast RAM onboard. the good thing is that most accelerators come with a SCSI controller builtin.


Well, what would be really useful would be a fully documented spec sheet of the A4K, so I'd know its internal/external full capabilities... Any good link on that ?

pX
 

Offline xaccrocheurTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 430
    • Show all replies
Re: GVP HC+8 SCSI+RAM Board - upgrade options
« Reply #3 on: February 28, 2003, 12:16:45 PM »
Quite ALL the info I was needing, Ilwrath.

Thank you VERY much.

I was wondering : Is there a place where [color=FF0000]OS3.9 *and* KS3.1 ROMs for A4K[/color][/b] could be ordered from and quickly delivered to France ? I mean, what would be the BEST choice on a reliability basis ?

Bottomline : No matter what it costs, I want the goods delivered, and the faster the better.

Anyway, thank you very big much for the rundown on A4K (this box plain rox) and the precious link.

pX

PS : For all of you who, like me, did not know that one :
http://pocketcalculatorshow.com
That may very well please you. I myself could not leave the boombox museum b4 finishing to read ALL the specs of ALL the machines ! It took me most of last night. Yawn. I mean I found myself as crazy and fetisher as those nerdies. Spooky :) Oh, and I found My own old never forgotten pseudo-walkman, on witch I discovered beauty by means of ACDC and Joy Division :)