Indivision Issues RESOLVED

[Splurge]

FINALLY got a hold of an Indivision and am having some distortion waves and periods of video loss.  The main thing I have been reading is the possibility of it not fitting properly on certain models of Lisa chips.  Mine seems to fit, but its really not all that snug.  Not NEARLY as snug as my IDEExpress adapter on my Gayle.

I can just tap the bottom of the Indivision and it will pop off.  Should it be a snug as the IDEExpress adapter is, where you have to use quite a bit of force to pry it off?  Also, I have read that the sanding approach seems to work as well.  Any ideas or anyone with similar problems?

Thanks all!

[Splurge]

Did you have the problems like I did with video going out and distortion or was it just a fit problem?

[Splurge]

Yeah, I applied the firmware.  Didn't help or change the video problems.  

[Splurge]

Just checked.  Its a CBM chip.

[Splurge]

There were two issues really.  The distortion and unstable picture was just as D said.  Grounded it better and picture is crisp and no video loss.

The looseness of the board was fixed by slightly pulling the socket pins out, and I mean slightly.  Once I did that it had a nice firm grip.  I also lightly brushed the pins Lisa and the Indivision socket with a metal brush.

Everything works perfect now.  Thanks for the help guys!