mediator pci 1200 no go

[mrgreedy98]

recently i purchased a mediator pci for my amiga 1200 in a non working state is it possisible for me to replace the socketed chips to make it work again?

i have an amiga 1200 with a bilzz pcc 040 and blizzard graphics card 3.1 roms with os3.9

it wont pickup in the auto config menu like my blizzard

[mrgreedy98]

hi there the pass thrugh works great with my bbp and bivision connected.

before i had a beefed pc supply pluged into the motherboard power connector and allways had problems since i used the mediator power connectors i have had no problems other than the board not working.

the board has the mach chips installed in it and i also have the multi media cd.

i was thinking the design is so simple it could only really be a dead chip

[mrgreedy98]

oh and also if i change the jumper on the mediator one way it wont boot and the other way it will

[mrgreedy98]

from what elbox told me it shuld pick in the early startup menu.
and it shuld come up with 2 seperate devices one with the elbox manufatcuring id label and the other being my blizzard
i have run the mmcd and followed instructions on the cd

i then asked elbox for help but they said sent it back and we will charge you 90 or so euros if it can be fixed.

i shuld be able to load the mediator.device but it fails to load into memory.

i have a voodo 3 3000 instaled in it and set the jumpers to run with a blizzard ppc card.

the voodo card works in another computer sweet as

i have cyber vision v5 or 4
and it wont pick up the voodoo.device like it shuld it works fine with my bivision