Looking for old sfs

[easy_john]

Looking for "SFS_1.252.lha", because people at morphos forum say, that its latest SFS, than work with MOS..

[easy_john]

save2600, OSS542
On sfs official site no more old sfs available.

ChaosLord
i dont know, but many people say, that only old sfs compatible with MOS.

DJBase
but i still cant get it to work.

---
I spend few days(!) trying start Mos pup 1.4.5, and it still dosnt start. ((

Maprom s alredy disabled.
I create empty SFS partition, 512mb, dh1.
I add SFS to RDB (1.277 version).
I format it under aos4.
I copy all CD to this partition.
I uncheck aos4 bootable flag, so Mos is first bootable partition.
I try to change some parameters in S-S:
- Add bootdevice (bootdevice=DH1).
- remove ">NIL" (no errors before first reboot)
- try module with ".idehack"
I try to manualy change SFS version in RDB to 1.252 or 1.202.

Nothing helps. Mos start, reboot, and theh hangs. hdd led allways on, but no hdd activity, display is blank (i wait few minutes every time).

I see all "Mos pup problem to boot" topics on morphzone.org, but still cant find answer..

[easy_john]

Piru
Yes, first time i try to use FFS, but i have FFS version 51.10, from ao4.
Same blank screen.

[easy_john]

Piru
How i can find where problem is?
Is it possible to enable some bootlog or what?

[easy_john]

I install to rdb sfs 1.252, and ffs from aos3.9.
And now I completly can't boot to mos or 3.9...
Arrr.
Later i reinstall it from aos4 bootcd.

[easy_john]

I connect new hdd to onboard ide, create one sfs partition, format under aos4, install 1.279 sfs in RDB, copy all CD files to it, disconnect scsi hdd and cdrom, and try to boot from new ide drive.
Same problems. No errors before first reboot, but blank screen after reboot.

[easy_john]

I try to start on a4000....

[easy_john]

Framiga wrote:
have you tryed to play with different resetlevel values in SYS:S/Startup-Sequence?

no. my amiga allways do reset an resetlevel=5, so i don't try another levels.

(and set bootdevice as well)

yes, i try set and not set bootdevice.

ah ... and the very latest SYS:Boot/roms/module.com1 is bugged. You have to use the one of the very first Morphos 1.4.5 release (10 August 2005)

where i can get another module.com1 ?