Can't get WB3.0 / 3.1 Install disk to boot in WIN UAE

[Thomas]

just keeps coming back to the usual Amiga 1.3 boot screen.

3.0 / 3.1 boot disks will not boot on Kickstart 1.3. You need at least Kickstart 3.0 to boot these disks. Or get a WB 1.3 disk to boot on Kick 1.3.

The Amiga Forever versions might be copy protected, the 3.1 rom is.

No, it is not. Although there are binary differences between the original 3.1 ROM and the Cloanto ROM, my A4000 works perfectly with the Cloanto ROM. It's for an A4000, though, it will not work on a 68000 machine, it needs a 68020 at least.

The ROMs in Amiga Forever are encrypted, though. You need to run Transrom inside WinUAE to extract a decrypted copy.

[Thomas]

WHDLoad does not run on Kick 1.3, it needs 2.0 at least.

[Thomas]

There is Kickstart 2.0 and 3.1 for A500/68000. That's not a problem, as long as you can change the Kickstart of the Minimig (don't know if this is possible).

[Thomas]

Either

select the HDToolbox icon and choose Information from the Icon menu. Look for the tooltypes and find the one reading SCSI_DEVICE_NAME=scsi.device. Change this to SCSI_DEVICE_NAME=uaehf.device. Save and retry.

Or

use an A600 ROM (for 3.1 it does not matter, but for 2.0 the ROMs are different), select A600 chipset and change the controller from UAE to IDE0 on the Harddrives panel.