Welcome, Guest. Please
login
or
register
.
Forums
Forums
Board
Topic
Home
Today's Posts
Gallery
Login
Register
Amiga.org
»
Amiga computer related discussion
»
Amiga Software Issues and Discussion
»
Catweasel MK2, boot off it's hard drive, installing os 3.9
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Catweasel MK2, boot off it's hard drive, installing os 3.9 (Read 1563 times)
Description:
0 Members and 1 Guest are viewing this topic.
Thomas
Hero Member
Join Date: Jun 2002
Posts: 3396
Country:
Thanked: 22 times
Re: Catweasel MK2, boot off it's hard drive, installing os 3.9
«
on:
June 24, 2005, 08:20:03 AM »
AFAIK you cannot boot from the Catweasel. It does not have a firmware with drivers, the drivers have to be loaded from disk unless you have a flash ROM (Algor, Romulus, Kickflash, eFlash) and put the drivers into it.
Bye,
Thomas
Logged
Email:
thomas-rapp@web.de
Home:
thomas-rapp.hier-im-netz.de
Thomas
Hero Member
Join Date: Jun 2002
Posts: 3396
Country:
Thanked: 22 times
Re: Catweasel MK2, boot off it's hard drive, installing os 3.9
«
Reply #1 on:
June 24, 2005, 11:45:44 AM »
If you have a free Zorro slot, yes. The Algor is an USB controller with flash ROM on board, Kickflash and eFlash are single Zorro boards with flash ROM and the Romulus is an add-on for the Highway USB controller.
I don't know if the Catweasel drivers are made to be written to a ROM, though. At least you can add the USB drivers to the ROM and boot from an external USB stick or HDD connected to the Algor or Highway.
Adding a flash ROM directly to the Catweasel is not possible AFAIK.
Bye,
Thomas
Logged
Email:
thomas-rapp@web.de
Home:
thomas-rapp.hier-im-netz.de
Print
Pages: [
1
]
Go Up
« previous
next »
Amiga.org
»
Amiga computer related discussion
»
Amiga Software Issues and Discussion
»
Catweasel MK2, boot off it's hard drive, installing os 3.9
There was an error while thanking
Thanking...