Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: can any one help........none amiga question?  (Read 1870 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amipac

  • Newbie
  • *
  • Join Date: Feb 2008
  • Posts: 37
    • Show all replies
Re: xblade case........none amiga question?
« on: March 10, 2008, 09:36:34 PM »
The usb cable of the case panel must have some V+, V-,GND, etc signs. If you don't have the manual of your motherboard, go here GA-M57SLI-S4 (rev1.0) manual and download it.
Note: It is better first to check which m/b rev. you have (1.0, 1.1 or 2.0).
After that just follow the connection schematics on your manual. Good luck  :-)
Logged
[color=003366]A1200[/color] 030/28MHz 8MB, Kick3.0, WB3.0 Greek, 4GB CF, 350W ATX PSU.
[color=003366]A2000[/color] rev.4, 1MB Ram, 2FDD, 1084S monitor.
 

Offline amipac

  • Newbie
  • *
  • Join Date: Feb 2008
  • Posts: 37
    • Show all replies
Re: xblade case........none amiga question?
« Reply #1 on: March 10, 2008, 10:53:56 PM »
Quote

carvedeye wrote:
(i have also attached jpeg images to my thread are they visable?)


I don't see any images here m8   :roll:

EDIT
-----
I just checked the source code of this page and found that you inserted images with your local hard disk's url. You have to upload to a free photo hosting server and then insert the url here.
Alternate method is to use Rapidshare.com or megaupload.com etc to upload and paste here the link.  :-)
Logged
[color=003366]A1200[/color] 030/28MHz 8MB, Kick3.0, WB3.0 Greek, 4GB CF, 350W ATX PSU.
[color=003366]A2000[/color] rev.4, 1MB Ram, 2FDD, 1084S monitor.
 
Pages: [1]   Go Up
« previous next »