Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: crt monitor  (Read 2941 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline tone007

Re: crt monitor
« on: April 29, 2011, 02:46:29 PM »
Should be a 15 pin connection (standard VGA monitor style) and I'd probably go for the Macrosystem scandoubler, the Microway is NTSC only.  AGA modes may lose some colors, but I've used A2000 scandoublers in A4000s with good results.

edit: though I've never actually tried the Macrosystem card in AGA modes, perhaps the compatibility is worse than others...
« Last Edit: April 29, 2011, 02:48:55 PM by tone007 »
Logged
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug
Alienware M14x i7 laptop running AmigaForever
 

Offline tone007

Re: crt monitor
« Reply #1 on: April 29, 2011, 02:55:01 PM »
15 pin connector with 3 missing pins maybe?  Probably OK.  Post the model number for verification.  LCDs are almost always worse for old Amiga scandoublers than CRTs, you'd need an Indivision scandoubler for best results on LCD.
Logged
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug
Alienware M14x i7 laptop running AmigaForever
 

Offline tone007

Re: crt monitor
« Reply #2 on: April 29, 2011, 03:06:57 PM »
Quote from: amiga4000freak;634363
samsung

model code AQ19LS9T/EDC


That should have a standard VGA connector, fine with Amiga scandoublers.
Logged
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug
Alienware M14x i7 laptop running AmigaForever
 
Pages: [1]   Go Up
« previous next »