« Reply #15 on: November 10, 2021, 08:38:39 AM »
Cheers Castellen. I ran ATK overnight. 3000T configured as follows:
1. CHIP mem populated with 2MB. I reinstalled the ZIPs I removed.
2. CSMKII 060 with 128MB SIMMS
3. No on-board FAST mem
Ran the all memory diag. No issues reported after 50+ rounds. Yesterday ATK reported errors in FAST mem with on-board FAST ram ZIPs populated. No probs reported today. I suspect I damaged the ZIPs / sockets when reinstalling them. I have new ZIPs arriving at end of this week. So may try them. I also have a 3000D so I can use that to test the ZIPs I removed from the A3000T.
Ill have a look at the PSU. I dont have a scope though but can check voltages using my multi-meter. Maybe I should recap the PSU. Not sure how onerous a task that would be but I am ok using a soldering iron so long as I am clear on whats to be removed and replaced.
Best.
Weed
« Last Edit: November 10, 2021, 09:10:26 AM by Tumbleweed »
Logged
A3000T, Cybervision64, CSMKII 060; A3000D, PicassoII, Z3 Fastlane; A2000D, 040, PicassoII; A4000D, A1200, Blizzard 030 MKIV (not working - next project)