Welcome, Guest. Please login or register.

Author Topic: OxyronPatcher 3.14 / Can not enable MMU on Blizzard 1260?!?  (Read 2246 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Tumbleweed

Quote from: Gulliver;549650
If you are using a Phase5 accelerator, why dont you use the Cyberpatcher program that comes with it?
What is so special about Oxypatcher on Phase5 hardware compared to Oxypatcher on the same device?


oxypatcher is said to provide a greater speed boost than Cyberpatcher on some operations, have a look here for some comparisons:

http://www.youngmonkey.ca/nose/articles/NewTekniques_9902/ImprovingPerformance/

Weed
A3000T, Cybervision64, CSMKII 060; A3000D, PicassoII, Z3 Fastlane; A2000D, 040, PicassoII; A4000D, A1200, Blizzard 030 MKIV  (not working - next project)
 

Offline Tumbleweed

Re: OxyronPatcher 3.14 / Can not enable MMU on Blizzard 1260?!?
« Reply #1 on: March 25, 2010, 07:23:49 PM »
Quote from: paul1981;549663
I once read in a CUAMIGA magazine article that the best results they obtained were when they were running both Cyberpatcher AND Oxypatcher together.
I'm sure someone on here will still have that article....I threw all my amiga magazines away about 10 years ago, so I can't tell you which issue it was.

I use neither of those though, I use MuRedox - part of the MMULibs... it does a fantastic job.

http://aminet.net/util/libs/MMULib.lha

What kind of turbocard are you running? I was using Cyberpatcher with my P5 MKII 060 and I've tried MuRedox but couldn't get it to work (I was left with a blank screen).

Weed
A3000T, Cybervision64, CSMKII 060; A3000D, PicassoII, Z3 Fastlane; A2000D, 040, PicassoII; A4000D, A1200, Blizzard 030 MKIV  (not working - next project)