Welcome, Guest. Please login or register.

Author Topic: Delfina: The DSP makes the difference!  (Read 9214 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Cheeeky

Re: Delfina: The DSP makes the difference!
« on: April 18, 2008, 03:32:23 PM »
I've tested this new library on an 060 A1200 connected to the clockport.

Tested in Octamed with the toccata emulation library and it runs fine, so I assume all AHI applications will run fine.

AMPlifier does not give any sound output and crashes when you stop it playing, when set to use hardware decoding of mpegs - When the version 4.16 library is replaced it works again.

***Update*** Working fine now

DelfMPEG by the same author as delfinampeg.device worked, so i looked a little deeper. In the file env:DELFINAMPEG there was a setting "l3rate 32" which was limiting the playback rate to 32000 - when this setting was deleted the playback worked again. Not sure if this is a default setting, I don't remeber putting it in there, but it looks like this was causing the problem with the new library.
 
The following users thanked this post: aio