EasyNet and NetGear Wireless MA401 *issue* please help!

[Marcb]

Daniele wrote:

++ Domain Name Servers ++
Primary DNS = 192.168.1.1
Secondary DNS =
Tertiary DNS =

----
++ TCPIP Settings ++
MBUF_CONF MAXMEM = 256K
Use Name Server = Second
Use Loopback = Yes
Debug SANA = Yes
Gateway Mode = Yes

++ Hosts ++
192.168.1.1 router
192.168.1.181 amiga amiga
127.0.0.1 loopback

++ Assigns ++
Assign AmiTCP: "Work:AmiTCP"


PLEASE HELP!!!!

It looks like it is setup to use the secondary dns server but you have that blank, try putting the dns server address in the second dns server slot as well?

[Marcb]

Hi,

All you need is the address of the router...

I just spotted something else, change the network type to Infrastructure and see how you go...

( From Project -> Interface Config then select the prism2.device and settings button...)

[Marcb]

Have you tried putting the DNS ( routers address ) in the secondary DNS as well?

[Marcb]

@ Daniele,


I'm stumped...

THe only other thing I can suggest that may help is to change the SSID name on the router to something else such as : ROADSL ; then change it to this in the easynet config also...

Reason for mentioning it is that I had an SSID with a space between tow words that worked fine with every other wireless thing in my house except for EASYNET, it baffled me for a few hours why I couldn't connect to the router but then I changed the SSID and all was fine