Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Minimig worthwhile?  (Read 3769 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline wolfchild

  • Jr. Member
  • **
  • Join Date: Oct 2007
  • Posts: 74
    • Show all replies
    • http://www.binarycombinations.com
Re: Minimig worthwhile?
« on: March 24, 2009, 07:13:25 PM »
Hey,

I've also got a couple of extra RAMs, bought with the intent of upgrading the memory.

Any advice on how to do so?  Do I have to straighten the tip of each pin?

Cheers!
Edwin
Logged
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
self-built minimig 1.1 :: 10ns SRAM :: 3.5MB RAM::ARM board::2GB SD card
VGA -> SCART cables currently available - PM me to order.
 

Offline wolfchild

  • Jr. Member
  • **
  • Join Date: Oct 2007
  • Posts: 74
    • Show all replies
    • http://www.binarycombinations.com
Re: Minimig worthwhile?
« Reply #1 on: March 24, 2009, 07:27:36 PM »
Thanks Darrin!

I need to buy me some desoldering wick and give it a try.  I think the chip select pins should be connected to the IO ports, right?

There is a photo from Jakub of the mod on minimig.net.  Will make sure to study it closely before putting any tools to them chips and board :)

Edwin
Logged
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
self-built minimig 1.1 :: 10ns SRAM :: 3.5MB RAM::ARM board::2GB SD card
VGA -> SCART cables currently available - PM me to order.
 
Pages: [1]   Go Up
« previous next »