Mediator pci.library 11.0

[klx300r]

@ DJS

thanks this is great news:hammer:

@ all

I want to put a scsi pci card in my Mediator and understand the Adaptec AHA-2940W/2940UW is the one to get for our Mediators?

[klx300r]

Not true, it's nearly as fast as my CSP0C is.

great to know! does hdtoolbox pick it up automatically or is there another program that's needed to setup the scsi on the Mediator?
(I know in my A4000 with Cyberstorm I had to use a Phase 5 specific scsi setup program)

[klx300r]

ok found and isntalled Adaptec scsi card and drive in my 1200T but now my Spider II USB stopped working and Hd Toolbox not seeing new scsi drive?

tired running Mediator setup again with no luck & the scsi card seems to be working as there's a LED on and the SCSI drive is spinning

[klx300r]

Select the right device and its a wide device check the box for wide?

ok problem solved with Mediator not finding my Spider 2.0 as it got loose when installing the scsi controller, quick reset and now it's workign fine again :-)

problem I'm having with HDToolBox is it's just not seeing the aic78xx.device??/..it's installed in Devs but for some reason it's not picking it up?? is there somewhere else it's supposed to be???

also was trying to find my scsi.device and I can't find it at all....no liquor tonight so double strange:hammer:

UPDATE:

it's a corrupt device file from aminet. tried downloading twice and still same issue...can someone with a good file send it to me please

[klx300r]

UPDATE:

it's a corrupt device file from aminet. tried downloading twice and still same issue...can someone with a good file send it to me please

anyone with a working aic78xx.device file please PM me so I can close up my A1200T and start working on my open A4000D

[klx300r]

@ Heiroglyph


thanks so much! will test out tonight opnce I'm back in my Amiga World:)

Update:
ok back home and good news the drive is now foudn by HDTools ! I was able to install and partition drive but after reboot I don't see new drives on WB? Typically the new drives show up on WB but then have to be formated.

[klx300r]

bumpity bump

[klx300r]

where are the Mediator scsi users???

Thomas any ideas;)

[klx300r]

Use the Format-Tool ! you can find it in the SYSTEM Drawer AFAIK maybe its in tools or utilities....

:hammer: THANKS!!! lol so simple Format saw the scsi partitions and only had to quick format them now I've got my SCSI HD working in my 1200T
:knuddel::pint:

[klx300r]

@acill

so what speed do you really get out of it? because i find it hard to believe, it reaches almost 40mb/s..

Just got mine configured today and SysInfo is showing 2.2MB/s which is quicker than my IDE drive in my 1200T.  Transferring a bunch of large files now and it's quick enough for me so I'm happy