Welcome, Guest. Please login or register.

Author Topic: Amiga 1200 Bootup Question...  (Read 1941 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline silentTopic starter

  • Newbie
  • *
  • Join Date: Aug 2007
  • Posts: 2
    • Show all replies
    • http://www.nqvw.com
Amiga 1200 Bootup Question...
« on: August 27, 2007, 01:54:11 AM »
Hello all. I've been reading through the posts and have relearned a lot of what I've forgotten plus learned a bunch of new stuff.  What a wonderful knowledge base!

The last time I used my A1200/40HD was back in 1997.  I was dialing into the net and using PINE for reading my email.  I also remember using a browser but since I knew very very little about how the net worked, my friend Brian set up everything for me.  When my ISP made some changes, that pretty much rendered my A1200 useless for surfing the net since I had no idea how to reconfigure it.  I understand getting an Amiga online is much easier than it used to be.

I went downstairs to my old computer desk and disconnected everything from the 1200 and brought it upstairs.  I took it all apart, thoroughly cleaned everything, and reassembled it.  It powered right up!  I forgot that my brother had installed an 030 accelerator (Microbotics 1238 XL or some such name) with 8 megs of ram.  I heard the hard-drive spool up but the 1200 insists on just sitting there with the kickstart screen.  I was able to boot off some floppies and play FA18 and some demos but I'm miffed as to why the the 1200 will not boot off of the HD.  What could have happened and does anyone have any ideas on how to fix it?  I had some cool games and stuff on the drive and I sure hope it isn't toast by now.  Thanks for the help and suggestions.  I'm going to continue reading through the forums and try to figure this out on my own but I'd appreciate anyone with some knowledge guiding and directing me on how to get this awesome little machine working again.  I'm wanting to put a wireless card in it and use for surfing the net again.

Erin
 

Offline silentTopic starter

  • Newbie
  • *
  • Join Date: Aug 2007
  • Posts: 2
    • Show all replies
    • http://www.nqvw.com
Re: Amiga 1200 Bootup Question...
« Reply #1 on: August 28, 2007, 05:05:27 AM »
I want to thank you for your help and suggestions.  I've been out of the Amiga loop for so long...sheesh.  I booted off of some floppies tonight and watched some demos - it was wonderful...memories and reminders of just how awesome this machine really is.  

The HD is indeed spinning up...I can hear it and I've done numberous reboots.  The HD light flickers like it's trying to do something but still nothing.  I did some more looking and I do have the kickstart 3.1 ROMS and I had purchased the WB3.1 disks.  I remember this machine used to boot up all the time.  I have guitar tabs and pictures on it as well as a bunch of my favourite mods.  

I haven't tried the suggestion yet of holding down both mouse buttons and checking what comes up on the list.  I tried HDTools tonight and it scans but can't find anything listed.

I spoke with my brother tonight and he had turned on the 1200 a couple months ago and it didn't find the HD then.  It spins up just fine and sounds wonderful but for some reason the 1200 just won't see it.  

I'll do the mouse trick and report back to you.  Thanks for the help!

Erin