Welcome, Guest. Please login or register.

Author Topic: SuperJAM install problem -- help?  (Read 1393 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orb85750Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show all replies
SuperJAM install problem -- help?
« on: January 10, 2011, 03:07:02 AM »
Is anyone familiar with the SuperJAM software? (from Blue Ribbon Soundworks -- the makers of Bars & Pipes).  I extracted the files with LHA, then I ran the proper hard drive installer.  SuperJAM seems to work fine until I try to load anything, such as a song, in which case I get the following error immediately (within the software itself)..

Program Failed (error #80000004)
Wait for disk activity to finish
[SUSPEND] or [REBOOT]

I'm rather clueless as to how to solve this problem, and it pretty much makes the whole of it unusable, so any help will be appreciated.  Thanks.
 

Offline orb85750Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show all replies
Re: SuperJAM install problem -- help?
« Reply #1 on: January 10, 2011, 03:56:51 AM »
Quote from: Matt_H;605280
I thought SuperJam! came with its own installer?

At any rate, when I installed it on my system, version 1.1 crashed immediately, but if I start 1.0 first, then quit, 1.1 works perfectly.

And 1.1 works fine out-of-the-box on my stock 3.1 partition.


Yes, it comes with its own installer.  That's what I used, after extracting the files with LHA (after my download).  I'll have to check what version this is.  But I'm doing it on my A1200 (stock, OS 3.1).  I was thinking there could be some incompatibility -- perhaps not.
 

Offline orb85750Topic starter

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show all replies
Re: SuperJAM install problem -- help?
« Reply #2 on: January 30, 2011, 04:02:51 PM »
Quote from: Matt_H;605280
I thought SuperJam! came with its own installer?

At any rate, when I installed it on my system, version 1.1 crashed immediately, but if I start 1.0 first, then quit, 1.1 works perfectly.

And 1.1 works fine out-of-the-box on my stock 3.1 partition.


I must have a bad LHA version, because I have the same problem on my A3000 as on my A1200. It is version 1.1.  I'm running in both cases under OS 3.1.  And I didn't see version 1.0 available anywhere -- any idea where to get it (or a working copy of 1.1)?