Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A2000 repairs  (Read 2482 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orb85750

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show all replies
Re: A2000 repairs
« on: March 20, 2009, 01:06:13 AM »
Is the floppy drive clicking once you remove all the cards?  If so, did you try inserting a workbench floppy?  (But it seems that you would see the request for the workbench floppy on screen if SCSI HDD controller card was removed and if everything were really OK.) -Dave
Logged
 

Offline orb85750

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1237
    • Show all replies
Re: A2000 repairs
« Reply #1 on: March 20, 2009, 09:05:24 PM »
Quote

murple wrote:
Quote

Tenacious wrote:
IIRC, an Amiga won't boot without DF0: connected, right?


It will boot with a hard drive OR floppy OR both. So, no need for DF0: if there's another boot device.

Even with no drives it will power up and show the kickstart screen prompting you to instert a bootable disk of some kind, which is enough to let you know if it works enough to display SOMETHING on screen.


If something is a bit wrong with the hard drive or controller card, it may get stuck in the boot-up and simply show a blank screen -- never getting to the floppy drive (that's what happened to me in the past with an A2000).  So make sure you remove all hard drive controllers if it does not boot up with them attached.  -Dave
Logged
 
Pages: [1]   Go Up
« previous next »