AMIGA 1200 SQUIRREL CDROM CD32 NOT WORKING?

[amigaguy00]

Hi guys i don't have much luck in resolving problems on here, but here goes Amiga 1200 (not tower)8mb ram expansion (disabled 4mb for pcmcia issue).My problem is that when i use the cd32 emulator disk created by either idefix or power cd rom software i get cd0:is not mounted,cannot open "atapi.device"unit 3 arghh but the drive works in Workbench perfectly and is mounted? please help with this issue thanks.

abit more info the cd drive is a ibm cdrm00201 & if i try scsi mounter/mount i get error:invalid rigid disk block but as i say the drive works and reads cd's.

[amigaguy00]

how do i run cd32 emulation from workbench as this may be easier as drive is mounted in Workbench.

[amigaguy00]

also wouldn't the cd32 boot disk mount the scsi drive, as when i used a ide cdrom drive on an Amiga tower i owned the cd32 bootdisk worked straight away & booted the cd32 cd rom it seems scsi is not as straight forward as ide on the Amiga?.

[amigaguy00]

i just hope this topic will be resolved as it's driving me mad i just  want to play a simple cd game compilation :-?

[amigaguy00]

any ideas on the commands in the script?,i booted with no startup-sequence managed to mount the cd drive with mount cd0: command,so i need to add these commands to a boot disc before it loads anything else .

[amigaguy00]

i checked the bios & it doesn't detect it as another device,but if i do the mount command it does work and works fine in Workbench and is always found via ide fix etc. But can't seem to boot a cd32 game disc as it's saying drive not mounted weird. :crazy:

[amigaguy00]

does any body know on here if  a Squirrel device is detected in the bios as a drive label as i have disconnected it and reconnected it and the bios lists the same devices.

[amigaguy00]

yes my drive light comes on just after you switch the Amiga on.

[amigaguy00]

have you checked the power supply going to your cdrom drive.

[amigaguy00]

Hi thanks for your help but how do i change the device name just rename cd0 to squirrelscsi.device? and were would i find the mount list sorry i haven't used an Amiga for 15 years.

[amigaguy00]

ok i reinstalled the scsi squirrel software,and i now have squirrelscsi.device in dosdrivers have also copied to boot disk but still can't boot from cd not mounted :pissed: