A600 glitches after recap

[F0LLETT]

How do you know, the ceramics were nearly short?
Did you remove them and read them, as in circuit they may well have some signs of resistance. Unless they are dead short, they are proberly fine.
Only way to check 100% is to remove them and test them.
I certainly would not be messing with paula. Its a video fault, so if leakage, check DAC, BT101 and Denise areas.
Bypassing things is not a great idea, did you actually solve that issue, as you do not say exactly.

PCB Explorer is anawesome tool, to help see where damaged track goes.
http://amigapcb.org/

[F0LLETT]

Damn that board looks well leaked. You should have led with pictures.

@Castellen
Getting 0.1 ohm is not always, depending on meter, as you have to take into account the natral resistance of meter being used.

[F0LLETT]

the vias on the tracks don't look the best, especially the middle one, but if I were you I would check all of them under and around the integrated circuit

That that perticular track will be issue, as other halve is still connected to layer via.