Author Topic: Drawbridge (Read 2625 times)

F0LLETT · « **on:** January 20, 2025, 03:50:01 PM »

Thats one thing I haven't tested yet. Will try and test tonight.

In regards to writing, it won't write anything flux wise protected. All other adf's are fine though.

F0LLETT · « **Reply #1 on:** January 21, 2025, 10:59:33 AM »

Quote from: SkulleateR on January 21, 2025, 10:55:32 AM

If you really want to use XCopy, just make a Custom Setup with DF0 using ADF and DF1 using DrawBridge/Greaseweazle, then start the XCopy ADF on DF0 and write back any ADF by copy from DF0 to DF1 ...

I would have done it this way.

You could also use EasyADF,

.

F0LLETT · « **Reply #2 on:** January 22, 2025, 08:53:23 AM »

Quote from: SkulleateR on January 21, 2025, 05:23:34 PM

Works fine, just do it

//EDIT : Just did some more tests and it seems that the configuration using DF0 or DF1 as REAL FLOPPY DRIVE will not be saved correctly. After powering off and on the A600GS it´s all back to using ADF, maybe someone can look into that

I tested last night, works fine in amibench. Will have to check on settings saving after switch off.

Author Topic: Drawbridge (Read 2625 times)

F0LLETT

Re: Drawbridge

F0LLETT

Re: Drawbridge

F0LLETT

Re: Drawbridge