Re: kickstart rom files

[F0LLETT]

Is there a particular naming scheme for these roms if you want to have all flavours available?
And can I have 3.1, 3.1.4 and 3.
2 A1200 roms instalked at the same time.

Only kick 1.3 A500/CDTV/A2000 and kick 3.1 A1200 are supported at the moment.
Adding more and custom, will be ignored.

[F0LLETT]

ok. But what rom does the A500p and A4000 setups use then?

Update, all roms are accepted now.
If you have correctly hash'ed commodore / cloanto roms, it will auto select correct one, when you select model.
i.e. A500+ will set V2.04
      A4000 will set V40.68

[F0LLETT]

It would be good if you could choose the rom when you add an hdf. i.e I might want to have 2 a1200 but using different OS - and roms

Your talking about custom roms. Which are rejected due to hash checks.

In PSPUAE, I just dumped the code that checked roms, so any could be used.
Would have to check on what could be done to allow this.

[F0LLETT]

Just tested to create a OS3.2 install in WinUAE by emulating a A1200 with kickstart 3.1.
Then the loadmodules was installed automaticly. Next installing it in a A1200 setup in A600GS with the 3.1 rom worked fine.
Next I did another test by creating the hdf while having a 040 cpu. It then warns about this, and instruct to reboot and install the mmu libraries. Strangely they didnt have an installscript on the mmulibs disk, or any instructions, but I just copied everything on the disk straight into the hdd. Then using that hdf with the A4000 setup in A600GS and it booted without issues.

Why use a 4000 config, when you set it up for 1200?