Sorry to have rekindled this thread again, but I have uncovered the same problem with my A3640 Rev. 3.1 board. I have followed this thread as wells as the article written by James Jackson on this very subject, but I have a couple of questions I would like to cast out to the techies. 1) Can I use the radial versions of the capacitors 22uf 16volts, or must I use the SMT versions? 2) Can I use a higher voltage like Jame Jackson eluded to in his article(i.e. 22uf 25volts)? I have removed all the caps C106(leaked), C105(leaked), C107(leaked), C102B(it appeared to have leaked), C102E (Did not leak, but removed just the same). Before proceeding with my Cap removal I tested with a good A4000 mobo and memory, all I was getting was a purple screen with the hard drive light constantly lit. Then tested mobo with A3600 '030/25 CPU card and booted right up. So, that is what isolated my attention to the A3640 and the Cap problem. Thanks for any help....
Follow-up.................................
Thanks for the information. It was most helpful. My questions were not directly answered, but the links provided were very helpful. Thanks, Mike.
