NewIcons sucks

[murple]

I tried to install NewIcons, and found out that it looks absolutely horrid on non-interlaced mode Amigas (and EVERYTHING looks horrid on interlaced). Is there anything similar to NewIcons that doesnt want to install gigantic icons? Or is there a NewIcons set that has sanely sized icons?

Also, I ran the NewIcons uninstall script and while it fixed most of my icons, some are still broken, like the Ram Disk icon. I wouldn't care so much since I've never in my life ever used the Ram Disk on an Amiga, but since that icon is kinda stuck prominently on my WorkBench I'd prefer it not to be a little square. I looked in the backups of my old icons and it looks like they were moved back to where they should be.

Is there any fix for this that doesnt involve reinstalling the OS?

[murple]

HellCoder wrote:
NewIcons doesn't suck just because you didn't get what you expected.

No, but it does suck for not making it clear that the icons look like crap on non-laced NTSC/PAL, and for having an uninstall script that only partially works.

[murple]

Did you use the default icon set that came with it? The icons I got were gigantic, and had even more gigantic borders around them. The icon for DH0: was easily over 2 inches tall on my 1084 monitor.

[murple]

Tenacious wrote:

Have you tried Magic Workbench and some of the other pre-OS3.5 icon packages on Aminet?  Mr.500 has posted some excellent Workbench screenshots (icons, backdrops, etc) on this website executed in only 8 or 16 colors on original ECS hardware.  Take a look!

Nope... I'll have to look. I'm a long term Linux user and there are tons of sites with screenshots of various X/KDE/Gnome/E setups that help you pick themes, icon sets, etc. With AmiNet you just get an ASCII description, if that. Screenshots would help a lot! I'll look for Mr 500's stuff.

[murple]

Matt_H wrote:
Check ENVARC:Sys for def_ram.info and remove it. If it's not there, check your startup-sequence or user-startup for commands (or a call to a separate script) that copy some icon to RAM:Disk.info

ENVARC:Sys/def_ram.info doesn't exist, nor does anything that copies an icon to RAM:Disk.info... any other ideas?

[murple]

Tenacious wrote:
I don't think you mentioned what version of the OS you are running.

WorkBench 3.1 with 3.0 ROMS (for now, AmigaKit is sending me a replacement for my 1200 motherboard with 3.1 ROMS).

Since the Ram: disk is a virtual device that is created during booting, there are no files there initially.

I had the default RAM Disk created on a fresh out of the box WB 3.1 install. It had a generic icon before I installed then removed NewIcons. Now it just has a little square. All my other icons seem to be OK. I haven't done anything to my S: scripts so the RAM Disk is created the same way as before... but now no icon.

With earlier versions of the OS, the Ram Disk icon was whatever was defined in the ENVARC:sys/ directory as the default icon for all disks.

Thats correct, and I still get that generic icon for Compact Flash and floppy disks I insert. No RAM disk love though.

I don't have the Amiga manuals since I got all mine used (except for my old A1000 which has all manuals). I dont really know how icons and .info files work on Amiga so I dont know how to create, modify, or remove them aside from basics like creating a new drawer and deleting a .icon file. Ive never found much online about how that works either. You have a recommended FAQ for that?

I'll see if I can repair the RAM disk by finding some icon to copy to RAM: in user-startup, but I'd like a pointer to more info if possible.

[murple]

Found this thanks to your disk.info mention...

http://www.nyx.net/~rdavis/AmigaHints2.html#ramicon

[murple]

I got the Ram Disk icon back. Thanks.

In addition to the FAQ, is there a recommended icon browser for Amigas? Doesnt seem to be one built in to WorkBench.

[murple]

Yes, I used NewIcons 4... is there an older one that's more suitable?

Also, while I got the RAM disk icon back by copying a disk.info to RAM: at boot, Ive noticed a few other missing/square icons. It seems that anything without a specifically defined icon now gets a blank icon (little square) rather than before where there were default icons for disks, folders, and files.

Anybody know how to repair that?

[murple]

OK... my Startup-Sequence is pretty much the default WB3.1 install. I've done most of my changes in User-Startup as we're supposed to. Anyway:

; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93)
; Startup-Sequence for hard drive systems

C:SetPatch QUIET

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

IF EXISTS DEVS:Monitors
  IF EXISTS DEVS:Monitors/VGAOnly
    DEVS:Monitors/VGAOnly
  EndIF

  C:List >NIL: DEVS:Monitors/~(#?.info|VGAOnly) TO T:M LFORMAT "DEVS:Monitors/%s"
  Execute T:M
  C:Delete >NIL: T:M
EndIF

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

; Added for NewIcons
;C:PatchOpenWB

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

IF EXISTS S:User-Startup
  Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:

My User-Startup is:

; Turn off drive clicks and fix wildcards
wildclick

; Replace CON: and RAW: with KingCON
Assign CON: DISMOUNT
Assign RAW: DISMOUNT
Mount CON: from DEVS:KingCON-mountlist
Mount RAW: from DEVS:KingCON-mountlist

; WHDLoad stuff
Assign AUTODOCS: DH0:AutoDocs
Assign INCLUDES: DH0:Includes

; Flash card
Mount DEVS:CF0
;BEGIN xfdPatch
xfdPatch >NIL:
;END xfdPatch
;BEGIN MUI
if exists "DH0:MUI"
   assign MUI: "DH0:MUI"
   if exists MUI:Libs
      assign add LIBS: MUI:Libs
   endif
   if exists MUI:Locale
      assign add LOCALE: MUI:Locale
   endif
   version >nil: exec.library 39
   if not warn
      if exists MUI:Docs
         if exists HELP:dummy ; do not remove
         endif                ; this entry!
         assign add HELP: MUI:Docs
      endif
   endif
endif
;END MUI

;BEGIN CAPREFS
C:CAPrefs >NIL:

copy ENVARC:sys/def_ramdisk.info RAM:Disk.info
;BEGIN DirectoryOpus 5
ASSIGN DOpus5: "DH0:Opus/Opus5"
PATH DOpus5:c Add
;END DirectoryOpus 5

And my ENVARC: dir... the .info files in there are the backup ones from before NewIcons.

    Sys (dir)
       def_8svx.info                    def_amigaguide.info
       def_amos.info                    def_anim.info
       def_archive.info                 def_arj.info
       def_ascii.info                   def_asm.info
       def_avi.info                     def_basic.info
       def_bmp.info                     def_brush.info
       def_Busydisk.info                def_c.info
       def_CD0disk.info                 def_CDDAdisk.info
       def_compress.info                def_cpp.info
       def_CTLG.info                    def_device.info
       def_disk.info                    def_dms.info
       def_doc.info                     def_drawer.info
       def_e.info                       def_email.info
       def_empty.info                   def_fax.info
       def_fd.info                      def_filearchive.info
       def_filesystem.info              def_flic.info
       def_font.info                    def_FTPdisk.info
       def_FTXT.info                    def_gif.info
       def_gzip.info                    def_h.info
       def_handler.info                 def_html.info
       def_i.info                       def_iff.info
       def_ilbm.info                    def_imploder.info
       def_inemail.info                 def_installer.info
       def_jpeg.info                    def_key.info
       def_keymap.info                  def_kick.info
       def_kickstart.info               def_KingCon.info
       def_lha.info                     def_lharc.info
       def_lib.info                     def_library.info
       def_loadmodule.info              def_lzh.info
       def_lzx.info                     def_m.info
       def_Mac0disk.info                def_make.info
       def_med.info                     def_mod.info
       def_mountlist.info               def_mp2.info
       def_MSD0disk.info                def_music.info
       def_NETdisk.info                 def_object.info
       def_outemail.info                def_outlinefont.info
       def_pcx.info                     def_picture.info
       def_png.info                     def_postscript.info
       def_powerpacker.info             def_pref.info
       def_printer.info                 def_project.info
       def_Quicktime.info               def_ramdisk.info
       def_rexx.info                    def_rnc.info
       def_s3m.info                     def_script.info
       def_sfx.info                     def_smus.info
       def_sound.info                   def_src.info
       def_sunau.info                   def_tar.info
       def_targa.info                   def_tex.info
       def_tiff.info                    def_tool.info
       def_trashcan.info                def_usenet.info
       def_uuencode.info                def_video.info
       def_voc.info                     def_wav.info
       def_xm.info                      def_zip.info
       def_ZIP0disk.info                icontrol.prefs
       overscan.prefs                   wbconfig.prefs
     Scala (dir)
       ScalaMM.oFontDB
     ClassAct (dir)
       ClassAct
  .info                            WHDLInstPath

[murple]

According to the stuff the install and uninstall scripts from NewIcons said, those were my pre-NewIcons files. I guess that was inaccurate though, as removing them fixed everything. Thanks!

Now to start looking for an icon set thats more colorful and nice looking which doesn't require a gigantic screen resolution.

That or a good flicker fixer setup so I can do 'laced modes sanely