Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: WB 3.1 will not boot on A2000!?  (Read 4860 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline wlemonds

  • Full Member
  • ***
  • Join Date: Jul 2007
  • Posts: 112
    • Show all replies
Re: WB 3.1 will not boot on A2000!?
« on: August 31, 2017, 11:46:45 PM »
Quote from: Findlarn;830272

But what I don't understand however is that the A2091 doesn't seem to have any termination jumpers on the PCB:

http://www.bigbookofamigahardware.com/bboah/product.aspx?id=1161



The 3 black pins between the internal scsi connector and the words "Internal SCSI Connector" are the termination and can be removed.
Logged
A500 PAL ACA500 Plus/Gotek
A1200 060/66 Tower/Mediator
A2000 Vampire/4XEIDE\'99/MNT 2000/Ariadne II+
A3000 040/40
A4000 Tekmagic 060/50
X5000/20
 

Offline wlemonds

  • Full Member
  • ***
  • Join Date: Jul 2007
  • Posts: 112
    • Show all replies
Re: WB 3.1 will not boot on A2000!?
« Reply #1 on: September 01, 2017, 11:17:54 PM »
Quote from: Findlarn;830295
Do you mean those soldered resistor packs? But if those are there, that means termination is on, right? So no need to remove them... But does that also mean that you cannot have an external SCSI device installed at the same time?...

Anyway... I will play around with those jumpers as soon as I can, and will come back later to report my results...


Sorry, I screwed up. I've been working on different systems with 2091, Fastlane, and Rapidfire. The 2091 has them soldered.
Logged
A500 PAL ACA500 Plus/Gotek
A1200 060/66 Tower/Mediator
A2000 Vampire/4XEIDE\'99/MNT 2000/Ariadne II+
A3000 040/40
A4000 Tekmagic 060/50
X5000/20
 
Pages: [1]   Go Up
« previous next »