Hi,
I originally had this in my A2000 in around '96 and it worked great for awhile then I put the A2000 away. Last year I pulled it out and it worked for awhile then I started getting a purple display. Thinking my Denise chip was at fault I moved the card to the A3000. It was working great for a bit then it started getting a purple tinted display. I thought I had it narrowed down to a short in the SD/FF cable, since with the A2000 I had to break off the video board to the video slot. Anyway, after adjusting, checking connections it was working before I stopped using the 3000 about 6 months ago.
Recently I got an A4000 and put it in that and worked for a time but now the purple display is back and I can't seem to get rid of it now.
It's there at the early startup menu and at workbench at 1024x768 in P96 display.
I have tried removing the SD/FF and not having that hooked up at all and just booting into a P96 display.
I've reset the card to factory default using the card's setup menu.
I've moved the card to different Zorro slots.
Has my video chip got a fault with one of the colors and that's what is causing my display to be purple?
Anyone else had this problem and has a solution?
Thanks!
:-?
Edit: BTW, it's not the monitor. I've hooked up my A1200 tower to it with no problems and at higher resolutions with the Voodoo 3000. This is on a Dell 2405FPW. I also have other PCs with VGA outputs and this problem doesn't come up.
