« on: January 28, 2013, 01:17:13 PM »
Necro bump!
I was playing with some more Chinon FZ-357 drives and found out how to successfully mod the other type. This other type I mentioned Is a Japan made model, says on the back label. The one I was able to mod was a Malaysia model.
Set rear jumpers as described in my previous post.
Malaysia model: solder Jumper on J2
Japan model: solder Jumpers on J2 & J18
Both working great!
This drive was salvaged from old PC and it worked after jumpering and
cleaning as Amiga drive without any soldering.
CHINON MODEL FZ-357
- Forefinger space: 39,3mm
- Eject size: 17,6x5,6mm
- LED: Orange
- Dimensions: 134x25mm
- Rear sticker: MODEL FZ-357 CHINON IND,INC. S/N 1747763 MADE IN JAPAN
- Front PCB text: M34035 (silkscreen)
- Rear PCB text: 318F3AC SEP01 H1 (silkscreen & stamp next to the jumpers)
- Wheel Stamps: ES05DA 17519B
- Main IC: OK 2 VC5037
- Jumpered: DS1,MM,RDY,TTL/C-MOS
- J2 shortcircuited via PCB by design
- J18 shotcircuited with 0ohm resistor by factory[/COLOR]
« Last Edit: February 06, 2013, 08:53:58 PM by Hanzu »
Logged
A4000 CR Rev D "Lian-Li Towered"+CSPPC 060 66MHz+Mediator+XSurf100 with USB+ZorRAM 256MB+Radeon 9200 256MB etc., A4000 original Rev B+CSPPC 060 50MHz+PIV etc., A4000 Rev B mobo, A4000T mobo+CSPPC 060 50 MHz, A4000T mobo, CD32, several A1200s, 2xA600, A500 Plus, A2000 Rev 6.2, several A500s with one ACA500+, Falcon 030, 1040STe, 1040STFM, 2xSVI X'PRESS (one MSX2+ modded), several C64s, 2xC128, 2x128D, C64 Reloaded MK2 and a big game collection.
The following users thanked this post: hd74ami