Dead Apollo 4040-4060 turbo Card -- Help!!

[Damion]

Is the CLK jumper near the oscillator set to 040? (It should be with an overclocked 060.)

edit:

It is set to 060 mode on the CLK jumper,

This is probably why it won't boot. Set to 040 and try again. (Or leave at 060 and go back to a 50MHz crystal.)

[Damion]

@scuzzb494

The 1240/60 can be a little fussy with certain motherboard revisions, but should be rock solid otherwise. (Mine is great... I just don't understand all the Apollo hating.;-)) Adding power to the floppy connector does help.

@Palm

Did you try different RAM, or disabling the RAM (jumper) and see if it boots?