Welcome, Guest. Please login or register.

Author Topic: Some questions after upgrading Blizzard 2040 with 68060 CPU  (Read 7503 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Damion

Re: Some questions after upgrading Blizzard 2040 with 68060 CPU
« on: November 14, 2008, 12:23:45 AM »
Quote

adolescent wrote:
@rodney37

Not sure how much of the cold 060 is just legend.  

But, was the CPU from China?  It's possible that it's an older mask that has been re-marked.  CPU060 and whichamiga will tell you the revision to be sure.


Yeah, I was wondering the same, as I've almost pulled the trigger on one of those "Chinese" 060's for my Tekmagic. It would be interesting to see if whichamiga reports a Rev. 6. I know that mine runs relatively cool at 80Mhz (always under 40C with a small heatsink and small amount of airflow, in a desktop case facing upwards), whereas the Rev. 1 is nearly too hot to touch at 50MHz. I can't easily remove the heatsink from my Rev. 6 or I'd do a quick temp comparison with both revisions at 50MHz.



 

Offline Damion

Re: Some questions after upgrading Blizzard 2040 with 68060 CPU
« Reply #1 on: November 14, 2008, 02:10:08 AM »
Possibly he has a 1E41J with an "XC" prefix, "XC" 71E41J would seem to be a fake. :/ Hopefully the former is the case, that would also explain the warm operation, though it should still run cooler than the Rev. 1.


 

Offline Damion

Re: Some questions after upgrading Blizzard 2040 with 68060 CPU
« Reply #2 on: November 14, 2008, 08:35:13 AM »
Cool, sounds like you got a real one. :) There must have been some very early ones (or samples) printed with the "XC" prefix.