Welcome, Guest. Please login or register.

Author Topic: FA A1200 with SCSI, RAM etc.  (Read 1598 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline roadsterTopic starter

  • Newbie
  • *
  • Join Date: May 2007
  • Posts: 9
    • Show all replies
FA A1200 with SCSI, RAM etc.
« on: May 19, 2007, 06:17:57 PM »
 Finally got round to putting my A1200 on ebay...A1200 on eBay

It's a good setup for anybody getting into the AMIGA scene and works very well. I'll put my accelerator on ebay tomorrow..........

Cheers


H
 

Offline roadsterTopic starter

  • Newbie
  • *
  • Join Date: May 2007
  • Posts: 9
    • Show all replies
Re: FA A1200 with SCSI, RAM etc. **UPDATE**
« Reply #1 on: May 23, 2007, 03:52:23 PM »
After delving deeper into the cellar I found a PC PCI SCSI card and SCSI CD ROM drive (internal type) that I used to use to swap the removable drive between Amiga and PC. So that's included in the auction as well.

Just as a matter of interest could I have joined the Amiga and PC together using the SCSI chain so both could have seen to CD and removable drives together???? Or am I talking nonsense.....
 

Offline roadsterTopic starter

  • Newbie
  • *
  • Join Date: May 2007
  • Posts: 9
    • Show all replies
Re: FA A1200 with SCSI, RAM etc. **UPDATE**
« Reply #2 on: May 24, 2007, 02:16:08 PM »
Quote

ddniUK wrote:
did the dataflyer scsi allow fast DMA access or were scsi transfers limited to the IDE speed?


Read the manual....doesn't say