Welcome, Guest. Please login or register.

Author Topic: SEAGATE ST410800WD  (Read 2307 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline BlackMonk

  • Full Member
  • ***
  • Join Date: May 2002
  • Posts: 106
    • Show all replies
Re: SEAGATE ST410800WD
« on: December 27, 2002, 09:04:17 AM »
Be careful with that HVD shiznat.  It can break stuff if you don't have the right SCSI controller and terminator.

/me has a dual-channel Adaptec AHA-3944UWD and a quad-channel Adaptec AHA-4944WD

Plus a bunch of full-height HVD drives though not that model.  I have two drives of that model but as single-ended versions.  

THIS IS NOT HAPPY FRIENDLY SCSI LIKE LVD.  THIS IS HVD.  I JUST WANT TO WARN YOU LEST YOU'RE NOT FAMILIAR WITH HIGH-VOLTAGE DIFFERENTIAL.
 

Offline BlackMonk

  • Full Member
  • ***
  • Join Date: May 2002
  • Posts: 106
    • Show all replies
Re: SEAGATE ST410800WD
« Reply #1 on: December 27, 2002, 09:06:00 AM »
Also, as mentioned, that's the same drive as an ST410800W but just using a different signal for the interface.  The jumpers are identical--probably identical (sans some extra ID jumpers) to the ST410800N which is what I actually have.