Welcome, Guest. Please login or register.

Author Topic: ARCnet to ETHERnet broker  (Read 4020 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline pyrreTopic starter

ARCnet to ETHERnet broker
« on: January 12, 2010, 11:24:44 PM »
Is it possible to set up a broker ( arcnet -> ethernet )to make arcnet computers go online?
Is it at all possible to transfer HTTP traffic over arcnet?
« Last Edit: January 12, 2010, 11:30:52 PM by pyrre »
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder
 

Offline pyrreTopic starter

Re: ARCnet to ETHERnet broker
« Reply #1 on: January 13, 2010, 10:14:02 PM »
Quote from: Trev;538007
8/16-bit ISA and PCMCIA cards should be easy to find. An ISA ARCnet card will cost as much as if not more than a new X-Surf Ethernet card, however, and a PCI ARCnet card from Contemporary Controls will run around 300 USD. Ouch. You'd think they were selling Amiga kit. ;-)

Can your ARCnet interfaces be replaced?


I don't know that.
I was planning on putting A500 on my network.
And arcnet seemed like a proper retro challenge. ;)

Pricy it is... Maybe i  have to find other options. :(

EDIT:
From time to time there are isa arcnet cards and active star hubs on ebay. some of them are not bad priced.
« Last Edit: January 14, 2010, 06:18:12 PM by pyrre »
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder
 

Offline pyrreTopic starter

Re: ARCnet to ETHERnet broker
« Reply #2 on: January 15, 2010, 12:58:10 AM »
@ zac67
Quote
To connect an A500 online, one of the best ways is probably adding a Z II NIC by means of a slingshot adapter. But then again, the best upgrade for a 500 is a 1200, providing a way for cheap PCMCIA NICs...
I already have an A1200 BPPC with PCMCIA network. have not had time to put it on internet yet. but time will come.
A500 on network/internet via arcnet sounded like an interesting challenge.
Have never worked with arcnet.

@ Trev
I like tinkering with networks. and i never trow away old computer parts.:biglaugh:
Like said before. arcnet sounds interesting and challenging.
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder