Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: How can i scan the scsi.device for units?  (Read 2181 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline pyrreTopic starter

How can i scan the scsi.device for units?
« on: October 18, 2007, 02:31:30 PM »
Assuming the cd-rom works, and is set correct on the cable.
HD being master and cd-rom being slave...
The CD0 and CD0.info does not mount the cd-rom,

DEVICE=scsi.device
UNIT=1
ACTIVATE=1
DONOTWAIT

others that that the mountlist is the standard os 3.9 file...
I need to get the cd-rom working before i can install os 3.9 from scratch...
Logged
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder
 

Offline pyrreTopic starter

Re: How can i scan the scsi.device for units?
« Reply #1 on: October 18, 2007, 08:32:37 PM »
@Thomas

thanx a lot, that did the trick...
Logged
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder
 
Pages: [1]   Go Up
« previous next »