Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Help installing DENEB card in A3000 desktop  (Read 8940 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: Help installing DENEB card in A3000 desktop
« on: June 23, 2012, 02:57:43 AM »
Quote from: WeiXing3D;697617
Kawazu, I will be receiving the jumpers I ordered from amigakit next week. I only have one more question: Should I leave the case of the Amiga open exposing the Deneb board, while I connect and turn on the system, so that I can download the software and applications? Then remove the jumper when finished and close the case?


If you have an old hard drive or an old CD/DVD ROM drive lying around then you might have a jumper on the back of them you can use (They're the same jumpers you use on IDE drives to make them master or slave, or use on some SCSI drives to set the ID number).

From experience, leave the case off until you have your Deneb software installed and the jumper removed.

One word of warning, make sure you have the latest copy of INSTALLER handy.  When I tried to install the Deneb software onto OS3.1 it failed and I had to upgrade to the latest version of INSTALLER (downloadable from Aminet).  I think OS3.9 works OK.

Once you have your USB stack working and it recognises a USB memory stick then go to the Deneb website, follow the links and download the latest software using a PC to the memory stick and then update the software on your Amiga.

Once you have your Deneb card working you'll never be able to use an Amiga without it.  :)
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: NEW- Help installing DENEB card in A3000 desktop
« Reply #1 on: July 08, 2012, 12:38:31 AM »
Check that the icon isn't off the visible screen area.

In my case, I first installed the software off a clean WB3.1 install and the actuall Deneb disk icon was off the screen below the visible area.  I had to scroll down to find it (or alternatively refresh your icons into columns).
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: NEW- Help installing DENEB card in A3000 desktop
« Reply #2 on: July 08, 2012, 05:44:55 AM »
Quote from: WeiXing3D;699387
You were so right. I didn't notice it the first time, so I scrolled down and ther it was. Thanks for the advice.


Glad I could help.  I was banging my head on the desk when it happened to me.  :)
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: Help installing DENEB card in A3000 desktop
« Reply #3 on: July 11, 2012, 11:34:29 PM »
Extract it on your PC and then copy the files to a couple of floppies, recombine them into a single folder on the Amiga and then do the setup from there.

I never realised the LHA file was so big because my A4000 has a high density drive.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 
Pages: [1]   Go Up
« previous next »