Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A2000HD: Is this a good deal?  (Read 3612 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: A2000HD: Is this a good deal?
« on: August 01, 2011, 08:02:19 PM »
Sounds like a bargain.  I have the Rev 6.2 mobo and that one allows you to change it from NTSC to PAL with the help of a sharp knife and then fit a switch if you want to toggle between the two.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: A2000HD: Is this a good deal?
« Reply #1 on: August 04, 2011, 06:58:41 PM »
Excellent.  Any plans to upgrade it?  A CPU card with some extra RAM would be a good start, or a SDFF.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: A2000HD: Is this a good deal?
« Reply #2 on: August 05, 2011, 01:36:27 AM »
You're not trying to run the AGA version of it on an OCS/ECS machine are you?
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: A2000HD: Is this a good deal?
« Reply #3 on: August 05, 2011, 03:19:52 PM »
Is your machine set up as NTSC by default?  You might want to see about converting it to PAL if it is possible with your mobo:

Quote
J102:  This jumper if available configures the A2000 for NTSC, or PAL operation. Agnus 8370, 8372A, 8372AB for example, support switching between NTSC and PAL. Rev 6.4 motherboards and possibly later revisions come with an 8375 Agnus by default which does not support switching. It was made in in separate versions for PAL and NTSC
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 
Pages: [1]   Go Up
« previous next »