« on: May 30, 2008, 03:39:08 PM »
It might be your Buddah. I used mine in my A3000 with the onboard SCSI and A2000 with a GVP SCSI card with no conflicts. Then suddenly the card stopped working. The startup menu still detects the card and says that it is working, but no devices will boot from it or appear in Workbench. I tested it again yesterday in an A4000 I picked up. Again the card is detected as working on the early boot menu, but when I took the bottable and working IDE drive from the A4000's internal connector and attached it to either port on the Buddha then it wouldn't boot. A second drive attached to the Buddha wouldn't show on Workbench either.
I guess I may have zapped a chip with static while swapping it between machines.
It's a great card when it works and I highly recommend it.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
