Welcome, Guest. Please login or register.

Author Topic: WTB: A3000  (Read 2175 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show all replies
Re: WTB: A3000
« on: May 06, 2008, 03:56:07 PM »
I need to get around to putting mine on eBay soon as all it is doing is gathering dust since I expanded my A2000.

It's in good exteral condition, complete with original keyboard and 2 floppy drives.  The mobo is fully populated with RAM, but I need to run SysInfo and find out what revision chips are in it.

When I got it I found the battery had started to leak so I removed it and cleaned up the "frosting".

I did have it decked out with a Cybervision 3D64, a Bhudda IDE card and a couple of hard drives.  I just got pissed off with it as there was nowhere handy to mount an internal CD ROM.  I was contemplating cutting the casing above the floppy drives and mounting a slimline PC laptop drive there (it should work nicely) using the Bhudda as the IDE controller.  The cards got pulled and went into my A2000 so it is back to basics now.
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.