Hi Have installed a M-Tec 68020 board on my A2000.
When I change the jumper to 020 mode, computer wont boot.
68000 mode, works fine.
Memory does not seem to register either way. (4mb )
I have tried every combination of jumpers, with/with out memory,
Taken out all the boards, and it still wont work.
Should I assume the board is fried?(no visible burn marks)
My Amiga:
A2000 Rev 6
A2091 , 0k, V6.1 boot roms
A2058 with 2 mb
3.1 rom on MB
Scsi CD/HD
Floppy
Thanks for help!
David
it seems that your accelerator is damaged because also memory doesn't works
if you have an A500 you can try it and check if works
