Welcome, Guest. Please login or register.

Author Topic: Quake and T-Zero on my A1200  (Read 2124 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline pVC

Re: Quake and T-Zero on my A1200
« on: March 14, 2014, 05:35:13 AM »
Quote from: Toastrman;760680
T-Zero is looking for more chip ram than I can muster. I tried a low res non-interlaced screen, but still no dice. I had them all running on an A4000T w/picasso II which freed up all the chip ram, but the "T" conked out. There must be a way to get these up and running. :angry:


T-Zero runs on my A1200/B1230-IV/32MB even from "Workbench" (actually Magellan2 as WBR), but I don't have anything extra running on that setup, no background pictures etc. But I think it's there on the limit.. IIRC it didn't start anymore if I had bg pic.

But anyway, you should try to start it by booting without startup-sequence (hold both mouse buttons at boot). Just run Setpatch first and maybe assign env: to ram: and then go into game's directory and run it. Then you'll have maximum amount of mem available.
Daily MorphOS user and Amiga active.