PSOne Screen Working!!!

[rja4096]

Hi, I managed to get a PSOne screen for 2 pounds from a car boot - its brand new. Any managed to hook it up through the compisite signal fo my A1200. Works great. My next step is to try connecting to the RGB out on the Amiga - for a better signal.

What next? - I have an A600 with hard disk, I might swap the hard disk for a CF card and try to make a A600 laptop.
I might remove the floppy drive as I don't use now I have PCMCIA - and fit rechargable batteries - does anyone know if running off 8 1.5 volt AA batteries for the 12v, and 3 1.5 volt AA batteries for the 5v (actually 4.5) would work. or do these voltages need to be exact?

Many Thanks, rick.

[rja4096]

Hi Fogot to say, I was amazed to see interlace mode was completely flicker free

[rja4096]

Umm, on powering by batteries but stepping down through some kind of step down circuitory, I guess I'd need something like at least 26 volts, to drop down to the -12 and +12 (difference of 24?). Also I'd need two drop down circuits, as I'd also need to drop down to the 5 volts. - which would share the same common ground(zero)?

Is this correct? Thanks.