Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1] 2   Go Down

Author Topic: EasyNet problem?  (Read 9316 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
EasyNet problem?
« on: October 15, 2011, 12:20:14 PM »
Hi all ive just installed easynet onto my amiga 1200 so that i can add it to my network using a PCMCIA wireless card, the installation went fine but as soon as i start up easynet and click go online i get a popup syaing "AmiTCP/IP version 3 or later must be started first" .I was under the impression that as soon as you installed and configured easynet you could go online it says during the installation that it installed AmiTCP/IP 3 onto my miggy am i doing something wrong?
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #1 on: October 15, 2011, 12:56:47 PM »
Anyone?
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #2 on: October 15, 2011, 05:02:14 PM »
No I have done fresh install of aos 3.9 so there is no other stack present other than the one installed with easynet?
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #3 on: October 15, 2011, 05:16:44 PM »
AmiTCP assigns, as the installer says it will make these changes?
« Last Edit: October 15, 2011, 05:22:48 PM by carvedeye »
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #4 on: October 15, 2011, 10:32:52 PM »
any one got any ideas?
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #5 on: October 15, 2011, 11:57:33 PM »
@amigakit

Ok i have installed easynet to my work partion but i dont know how to copy s:user-startup file and post it on here and i dont know how to post the output for Configuration Help, sorry i am hopeless when it comes to amiga's i am almost on the verge of giving up on everything amiga as i just have no luck with them :(
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #6 on: October 16, 2011, 12:26:11 AM »
here is a video of me trying to configure and install easynet if im doing it wrong then please tell me.  http://www.youtube.com/watch?v=V-cLSZl565Y
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #7 on: October 16, 2011, 06:58:49 PM »
bump
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #8 on: October 16, 2011, 08:11:12 PM »
is that the same as local domain name? if so then that field is blank in my router setings.
« Last Edit: October 16, 2011, 08:17:10 PM by carvedeye »
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #9 on: October 16, 2011, 08:34:47 PM »
Ok here's what i have done i have entered my amiga's IP as 192.168.0.6, i Have entered my netwrok mask as 255.255.255.0, Gateway is my router IP which is 192.168.0.1, Amiga's Host Name is Amiga, Netwrok domain name is 192.168.0.1 (same as my router IP) my DNS Address is (Again) 192.168.0.1. If I have done something wrong please tell.
« Last Edit: October 16, 2011, 08:44:38 PM by carvedeye »
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #10 on: October 16, 2011, 09:21:51 PM »
Quote from: amigakit;663720
You did not fill in the Network Domain Name section of Network Settings- that is why there is still an alert icon next to this field.


How do find out what my Network Domain Name is?
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #11 on: October 16, 2011, 09:37:16 PM »
is my network domain name cable.virginmedia.net (EasyNet will not let me type cable.virginmedia.net as it is to long) or is it virgin.net? Please i really want to get my amiga online through my wireless adaptor :(
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #12 on: October 16, 2011, 09:48:29 PM »
ok i have entered virgin.net as the domain name, started easynet and clicked online, it then says going online then says it says it is accessing live update server and then it says it is online, i then launch Aweb but when i try to enter websites it says it "error while retrieving url: http://www.google.co.uk" "cannot open file "work: aweb3se/cache/awecd2a/0000006a" any ideas?
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #13 on: October 16, 2011, 10:33:52 PM »
still nothing? i will do another video of it connecting and will also show what settings i have and talk through what i have done.
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 

Offline carvedeyeTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2007
  • Posts: 1563
    • Show all replies
Re: EasyNet problem?
« Reply #14 on: October 16, 2011, 10:53:44 PM »
Yeah ive already tried that but still no luck im uploading a video of how i have set it up.
Logged
A1200T: M1230XA 50Mhz 68030 w/64mb,DVDRom, 80gb hdd, Realtek LAN Card, Mediator LT4 + Radeon 9250 128mb(used for fast ram), Spider USB Card, Voodoo 3 3000 OS 3.9 +bb 1-3
 
Pages: [1] 2   Go Up
« previous next »