Plea for CV64/3D help... :((

[Pertinax]

Up until yesterday, everything was fine with set-up.
Then, for no apparent reason, my CGX/CV64-3D setup went down the pan.

I cannot get CGX to run at all, and when booting the line C:LoadMonDrvs in
s:startup-sequence locks the machine up.
Removing this line and replacing it with the originals (the list devs: etc...
executing of monitor drivers etc)...  I have the message "Error in command name"
returned.

I have uninstalled CGFX 4(its the latest pre. release) and reinstalled it twice
now, and once by hand.  I've moved my CV64-3D board into another zorro slot (Z-IV
 busboard in a 1200T) and nothing.  The board is said to be working (shows on early
boot up).  I'm running OS3.9 + bb2 (no rom update).

As I've said all was fine till yesterday, now it just wont work!!

Any ideas???  Please???  Hate having to use 640x512 in 16 cols...

Thanks for any help,

Jason

[Pertinax]

Thanks for the ideas guys but still no joy...

Tried the "manual" approach to running the driver
but still the same result - either complete lock up
or "Error in command name"...

Also checked for viri and nothing has shown up (thats
one good thing then...)

@red - have taken the set-up (almost) to pieces, and
everything is tight (but haven't clean anything). Thing
is the rest of the boards I have are working fine so its
looking more and more like a cv64/3d board (hardware)
or a CGX (software) problem.

Any way I can test the board without enabling the driver?

Thanks, ATB

Jason

[Pertinax]

Bit of an update...

Have installed P96 and managed to get a working Cv64-3D screen... for about 5 minutes.  Then total lockup.
Rebooted and nothing, the machine just hangs as before.
Went back to CGX and got a screen... lock up after 5 minutes or so and then hanging on
rebooting.  

Over the past few days (since Sunday) I've managed to get a Cv64-3D screen (on either
P96 or CGX) about 3 times.  Roughly once every other day.

Looks like its definetly a hardware problem to me... thoughts?
The card definetly can work (as I *can* get a screen with it) but only on and off.
The card is also producing a signal, as my monitor can testify - a seemingly "blank" signal.

Anyone got a cheap, WORKING Cv64-3D for sale?

ATB,
Jason